Contact

Dynostar
Hogerwerf 15
4704 RV Roosendaal
The Netherlands

T : + 31 165 521 336

Free quote?

Want to know what we can do for you? Request a free quote!

Enquiry

Dynostar RC3300 MK2

THE ULTIMATE 2WD DYNO FOR PROFESSIONALS 

The Dynostar RC3300 is the ultimate dynamometer for professionals involved in diagnosis and tuning on a daily basis. This model is a complete, maintenance-free, advanced roller chassis dynamometer which can handle power up to 950 kW and thanks to the powerful retarder, the dynamometer can be used to test cars with power up to 619 kW (with eddy current brake). For more power we advise the Dynostar Model RC6600. This Model is fitted with a second 3300Nm eddy current brake which virtually doubles the capacity of the dynamometer to around 1237 kW. 

To guarantee optimum grip the rollers will be grooved as standard and also can optionally be treated with a tungsten carbide coating.



The Dynostar Model RC3300 and Model RC6600 are equipped with various handy features such as integrated pneumatic unloading aid. This system ensures that vehicles can drive on and off easily. The advanced system raises the vehicle for unloading and blocks the rollers. In addition, the rollers are positioned low in the dynamometer so even vehicles with an extreme low ground clearance can be tested easily. The Dynostar Model RC3300 and Model RC6600 can be integrated in your workshop floor but also operate perfect whenever it's not placed into a pit.

Standard hardware features:

  • DAS Data Acquisition System
  • Advanced Dyno Station Software package
  • Junction Box
  • Calibration weight
  • Remote controller
  • Instructions and manual
  • CE marking
  • Emergency brake
  • Pneumatic lift device for loading and unloading the car
  • Straps and floor anchors for immobilizing the car
  •  

Standard software features:

  • Static power measurement
  • Dynamic power measurement: Roll on, Negative test, All gear, Variable transmission, 
    Fast acceleration, Multiple speed
  • Acceleration test
  • Speedometer test
  • Weather station
  • Power correction to DIN, EEC and SAE standard
  • Automatic braking after completing a dynamic test
  • Real time display of engine speed, power, traction and vehicle speed in software
  • Simulation of roller and air resistances for simulating situations on the road
  • Automatic calculation of losses in the drive line and calculation of power at 
    crankshaft

 

Dynostar RC3300

Weight: 1550 [kg] 3417 [lbs]
Dimensions (lxwxh): 3,00 x 1,3 x 0,74 [m] 118 x 51x 29 [inch]
Power requirements: 230 [V]  
Recorded current max.: 22 [A]  
Air requirements: 6 [bar]  
Max. speed: 250 [kmh] 155 [mph]
Drum width: 0,7 [m] 27,6 [inch]
Drum diameter: 0,4 [m] 15,7 [inch]
Number of drums: 4  
Track width  2,09 [m] 82,2 [inch]
Min. track: 0,7 [m] 27,2 [inch]
Max. track:  2,09 [m] 82,2 [inch]
Max. axle load: 3500 [kg] 7700 [lbs]
Total inertia: 30,8 [kgm²]  
Equivalent vehicle mass: 770 [kg] 1711 [lbs]
Max. dynamic power: 950 [kW] 1275 [hp]
Max. static power cold: 619 [kW] 830 [hp]
Max. static power continuous: 258 [kW] 346 [hp]

 

Dynostar RC6600

Weight: 1950 [kg] 4299 [lbs]
Dimensions (lxwxh): 3 x 1,3 x 0,74 [m] 118 x 51x 29 [inch]
Power requirements: 230 [V]  
Max. consumed current: 43 [A]  
Air requirements: 6 [bar]  
Max. speed: 250 [kmh] 155 [mph]
Drum width: 0,7 [m] 27,6 [inch]
Drum diameter: 0,4 [m] 15,7 [inch]
Number of drums: 4  
Track width  2,09 [m] 82,2 [inch]
Min. track: 0,7 [m] 27,2 [inch]
Max. track:  2,09 [m] 82,2 [inch]
Max. vehicle mass: 3500 [kg] 7700 [lbs]
Total inertia: 34,6 [kgm²]  
Equivalent vehicle mass: 865 [kg] 1907 [lbs]
Max. dynamic power: 1283 [kW] 1721 [hp]
Max. static power cold: 1238 [kW] 1659,7 [hp]
Max. static power continuous: 517 [kW] 693 [hp]