4704 RV Roosendaal
T : + 31 165 521 336
Want to know what we can do for you? Request a free quote!Request quote
Dynostar Model 2SP
with a 10mm thick aluminium housing. In this housing, all parts such as roller pair, eddy-current brake, load cell, and rpm sensor are integrated. Mounting any bike on the dynamometer is easy. The Dynostar Model 2SP is equipped with 2 rollers. The rear roller is adjustable, enabling the testing of scooters and mopeds with different wheel diameters.
The electronics are integrated in a shock free and waterproof suitcase. The Dynostar Model 2SP can be seen as a very functional dynamometer. The dynamometer can be set up, used and then stored away again all within a relatively short period of time. With its telescopic handle, wheels and the low total weight of just under 50Kg, only one person is needed to move the dyno. Testing scooters and mopeds on the dyno can be completed in less then 15 seconds – it is that simple!
Air and rolling resistance are simulated by the electronics, this means that the police officer doesn’t need to sit on the vehicle during testing. Deviation in the tyre pressure has no influence on the measurement either, so the dyno is absolutely fool proof! special ramp is provided which serves two purposes.
|Dimensions (lxwxh):||50x40x20 [cm]|
|Power requirements:||230 [V]|
|Calibrated max. speed:||125 [km/h]|
|Drum diameter:||0.14 [m]|
|Number of drums:||1|
|Max. power:||25 [Kw]|
Maintenance free product
The Dynostar Model 2SP is a maintenance free product.
The dyno has been equipped with high quality bearings and thanks to the application of the eddy-current retarder there will be no “wear and tear” to the brake.
The Dynostar Model 2SP has already proven its qualities. 233 units have been sold to the Dutch police and 21 units have been sold to the RDW (Dutch ministry for road transportation). Do you want to get acquainted with the advantages of the Dynostar Model 2SP? Contact your nearest Dynostar representative for a demonstration!