Contact

Dynostar
Hogerwerf 15
4704 RV Roosendaal
The Netherlands

T : + 31 165 521 336

Free quote?

Want to know what we can do for you? Request a free quote!

Request quote

///Dynostar 2C MK2

Dynostar 2C MK2

Dynostar 2C MK2

The updated Dynostar Model 2C MK2 makes mobile testing easy! With this supercompact Dynostar Model 2C MK2 you can test scooters at every desired location like your workshop, at the track or on the street. Within a relative short time you can make the Model 2C MK2 operational for use and it's packed again in that same timespan. All the accessories like the cables, straps and such are integraded in the suitcase with the controles for the Model 2C MK2.

It is also possible to integrate a laptop in this suitcase for optimal portability. A special ramp with integraded wheelstop is standard for this Model 2C MK2. The only thing you need besides the Model 2C MK2 is a 230V connection. Easy testing without the need to invest in a dyno room. And when you don't need the Model 2C MK2 it doesn't take in a lot of space when put away.


The Dynostar Model 2C MK2 is equiped with a uniquely developed eddy-current brake which allows two-wheelers with up to 62.8 Kw in a cold condition. The dynamometer capabilities for continuoes power is up to 14Kw. Thanks to the eddy-current brake driving resistances can be simulated so road simulations can be performed. This makes the dynamometer besides a tuning tool also a good diagnostic tool.

Standard hardware features:

  • 2C MK2 chassis with ramp kit
  • MiniDAS Data Acquisition System
  • Advanced Dyno Station Software package
  • RS232 cable (length 3 m)
  • Remote control (length 2.5 m)
  • Straps (2 pcs)
  • Instructions
  • CE marking

Standard software features:

  • Static power measurement
  • Sweep test
  • Weather station
  • Power correction to DIN, EEC and SAE standard
  • Real time display of engine speed, power, traction and vehicle speed in software
  • Simulation of roller and air resistances for simulating situations on the road
  • Automatic calculation of losses in the drive line and calculation of power at crankshaft
Weight: 48.7 [kg]  
Dimensions (lxwxh): 0.55x0.382x0.225 [m]  
Power requirements: 230 [V]  
Air requirements: N/A  
Max. speed: 200[kmh]  
Drum width: 0.21 [m]  
Drum diameter: 0.14 [m]  
Number of drums: 2  
Total inertia 0.4398 [kgm²]  
Equivalent vehicle mass: 89.8 [Kg]  
Max. Power cold 62.8 [Kw] 84.2 [hp]
Max. Power for 3min 20.1 [Kw] 27.0 [hp]
Max. Power continuesly 14.6 [Kw] 19.6 [hp]
Request quotation