Contact

Dynostar
Hogerwerf 15
4704 RV Roosendaal
The Netherlands

T : + 31 165 521 336

Free quote?

Want to know what we can do for you? Request a free quote!

Request quote

///Dynostar MRC1000 MK2

Dynostar MRC1000 MK2

Your first dyno? MRC1000 MK2: Perfect for the job!

Easy to work with and affordable. Above ground and moveable. That is the new Dynostar MRC1000 MK2.

The Dynostar MRC1000 MK2 is a mobile, powerful and profitable dynamometer. Test up to 505 kW and speeds up to 275 km/h anywhere! All you need is a 230V power supply and a compressed air supply!

The recently updated Dynostar Model MRC1000 MK2 makes mobile testing possible. Whether you want to test “at the track” or at a workplace, and don't have the option of building a dynamometer into the workplace floor, the Dynostar Model MRC1000 MK2 is the ultimate solution for mobile testing. The Dynostar Model MRC1000 MK2 is a maintenance-free, advanced and mobile roller chassis dynamometer and thanks to its innovative mobile frame, is easy to relocate and can be used at any site. A 230V power supply and 6 bar air pressure is all you need to be able to work with the dynamometer. 

The Dynostar Model MRC1000 MK2 can measure power up to around 505 kW (dynamic) and 275 kW in static measurement. Both front and rear wheel drive vehicles can be tested easily using the Dynostar Model MRC1000 MK2. Drive on and off via 2 (removable) ramps.

Standard hardware features:

  • DAS Data Acquisition System
  • Advanced Dyno Station Software package
  • Junction Box
  • Remote controller
  • Calibration weight
  • Pneumatic brake
  • Straps and anchors for immobilizing the car
  • Instructions and manual
  • CE marking

Standard software features:

  • Static power measurement
  • Dynamic power measurement: Roll on, Negative test, All gear, Variable transmission, 
    Fast acceleration, Multiple speed
  • Acceleration test
  • Speedometer test
  • Weather station
  • Power correction to DIN, EEC and SAE standard
  • Automatic braking after completing a dynamic test
  • Real time display of engine speed, power, traction and vehicle speed in software
  • Simulation of roller and air resistances for simulating situations on the road
  • Automatic calculation of losses in the drive line and calculation of power at 
    crankshaft
Chassis welding Laser cut parts Centralized electrics Overview switch & connecting panel MRC1000 MK2 internal view New MRC1000 MK2 Transport system New MRC1000 MK2
Weight: 854 [kg]  
Dimensions (lxwxh): 2,80 x 0,96 x 0,43 [m]  
Power requirements: 230 [V] 12 [A]
Air requirements: 6 [bar]  
Max. speed: 275 [km/h]  
Drum width: 0,6 [m]  
Drum diameter: 0,3 [m]  
Number of drums: 4  
Min. track width: 0,8 [m]  
Max. track width: 2,0 [m]  
Max. axle load: 2000 [kg]  
Equiv. vehicle mass: 382 [kg]  

 

 

Request quotation